1. Raw Materials and Production Process
- Raw material: Polycarbonate sourced primarily from Covestro and Sabic. No recycled or reprocessed materials are used to guarantee consistent product quality.
- Double-sided high-concentration UV coating effectively extends outdoor service life and boosts anti-aging performance.
2. Product Features & Advantages
- It integrates the strengths of solid polycarbonate sheets and corrugated polycarbonate panels. Roll-pack design simplifies transportation, and custom lengths are available. Overlapping installation is straightforward with excellent waterproof performance and high construction efficiency. It delivers outstanding deflection performance: a 1.5 mm thick Softlite achieves equivalent rigidity to a 3 mm thick solid polycarbonate sheet.
- Semi-matte surface treatment softens transmitted light for a bright, comfortable visual effect.
3. Specifications & Dimensions
| Item | Parameters |
|---|---|
| Available Thickness | 1.0 mm, 1.2 mm, 1.5 mm, 1.8 mm, 2.0 mm |
| Projected Width | 1.26 m |
| Standard Roll Length | 30–50 m; custom lengths supported |
| 1.0 mm (1.26 m × 50 m) Roll | Weight: 78 KG, Volume: 0.36 m³, Roll Diameter: 0.6 m |
| 1.2 mm (1.26 m × 50 m) Roll | Weight: 93.6 KG, Volume: 0.25 m³, Roll Diameter: 0.5 m |
4. Product Details & Installation Guidelines
Available Colors
AC932# Brown, AC001# Lake Blue, AC002# Royal Blue, AC027# White, AC257# Grass Green, AC547# Orange Yellow
Overlapping Installation Methods
- Horizontal overlap: Aluminium bar overlapping (covering 2.5 wave crests) or aluminium bar with aluminium base overlapping
- Vertical overlap: Aluminium bar overlapping (20 cm overlap length) or aluminium bar with aluminium base overlapping (20 cm overlap length)
- Mandatory rule: Vertical overlapping length shall not be less than 20 cm. Neutral silicone sealant must be applied to all joints and gaps.
Fastening Requirements
Special waterproof gaskets are required for self-tapping screws; screws cannot be driven directly into the panel surface. Pre-drill and enlarge holes with a diameter 4 mm larger than the screw diameter to prevent panel cracking caused by thermal expansion and contraction.
